火电湿法烟气脱硫流程优化的实现方案研究

在给定脱硫流程模拟优化参数的情况下,尝试了基于DCS系统和基于OA局域网的两种优化控制改进方案,后一种方案解决了优化控制系统的安全性、稳定性、扩展性、易管理等问题。同时采用该控制系统的3号脱硫系统的控制效果最佳,且脱硫效率循环浆液泵功率比随着操作方式相近度的提高而呈递增趋势。     

Synthesis, characterization and experimental investigation of Cu-BTC as CO2 adsorbent from flue gas

Porous Cu-BTC material was synthesized by the solvothermal method. Powder X-ray diffraction (PXRD) was used to test the phase purity of the synthesized material and investigate its structural stability under the influence of flue gas components. The thermal stability of the material was determined through thermal gravimetric (TG) analysis. Scanning electron microscopy (SEM) was employed to study the microstructure of the material. Cu-BTC was demonstrated not only to have high CO₂ adsorption capacity but also good selectivity of CO₂ over N₂ by means of packed bed tests. The adsorption capacity of Cu-BTC for CO₂ was about 69 mL/g at 22°C. The influence of the main flue gas components on the CO₂ capacity of the material were discussed as well.     

Operating condition influences on PCDD/Fs emissions from sinter pot tests with hot flue gas recycling

This study was designed to clarify the influence of operating conditions on the formation and emissions of polychlorinated-pdibenzodioxins and dibenzofurans (PCDD/Fs) from a sintering process with hot flue gas recycling. A pilot scale sinter pot with simulated flue gas recycling was developed, and four key operational parameters, including temperature, oxygen content of the simulated waste flue gas, the coke rate of the sintering mixture, and the quicklime quality, were selected for exploring PCDD/Fs formation. The results showed that the temperature of the recycled flue gas had a major affect on PCDD/Fs formation, and a high temperature could significantly increase their formation during sintering. A clear linear correlation between the temperature of recycling flue gas and PCDD/Fs emission (r = 0.93) was found. PCDD/Fs could be reduced to a certain extent by decreasing the level of oxygen in the recycled flue gas, while sintering quality was unchanged. The coke rate had no significant influence on the formation of PCDD/Fs, but the quality of quicklime used in the sintering mixture could affect not only the amount of PCDD/Fs emissions but also the sintering productivity. Compared with a benchmark sinter pot test, PCDD/Fs emissions markedly decreased with improvements to quicklime quality. However, the reduction in PCDD/Fs emissions realized by using high-quality quicklime was limited by the temperature of the inlet gas. The highest reduction achieved was 51% compared with conventional quicklime when the temperature of the inlet gas was 150°C.     

Ammonium-dependent regulation of aerobic methane-consuming bacteria in landfill cover soil by leachate irrigation

The impacts of landfill leachate irrigation on methane oxidation activities and methane-consuming bacteria populations were studied by incubation of landfill cover soils with leachate and (NH₄)₂SO₄ solution at different ammonium concentrations. The community structures and abundances of methane-oxidizing bacteria (MOB) and ammonia-oxidizing bacteria (AOB) were examined by PCRDGGE and real-time PCR. Compared with the pure (NH₄)₂SO₄ solution, leachate addition was found to have a positive effect on methane oxidation activity. In terms of the irrigation amount, ammonium in leachate was responsible for the actual inhibition of leachate. The extent of inhibitory effect mainly depended on its ammonium concentration. The suppression of the predominant methaneconsuming bacteria, type I MOB, was responsible for the decreased methane oxidation activity by ammonium inhibition. Methaneconsuming bacteria responded diversely in abundance to ammonium. The abundance of type I MOB decreased by fivefold; type II MOB showed stimulation response of fivefold magnification upon the first addition but lessened to be lower than the original level after the second addition; the amount of AOB was stimulated to increase for 20-30 times gradually. Accumulated nitrate from nitrification strengthened the ammonium inhibition on type I and type II MOB, as a result, repetitive irrigation was unfavorable for methane oxidation.     

氨法烟气脱硫循环液沉降试验研究

通过湿法烟气脱硫副产硫酸铵生产工艺中的循环母液混凝试验,讨论母液的沉降性能,初步探讨母液被循环浓缩的程度对混凝处理效果的影响。     

移动通信基站电磁环境监测浅析

根据国家现有监测技术规范,结合移动通信基站建设和监测工作实践的实际,阐述监测工作的要点及监测设备要求。     

不同TS浓度互花米草沼渣二次发酵特性研究

中温（35±1）℃条件下,沼渣经6%的NaOH常温下处理48 h后,在TS含量8%、10%、12%的条件下沼气发酵.分析了发酵过程中日产气量、累积产气量、甲烷含量、pH值、挥发性脂肪酸（VFA）的变化,从不同角度考察TS含量负荷对沼渣二次发酵特性的影响.单位TS的日产气高峰分别达10、14、13 mL.g-1,累积产气率为217、227、228 mL.g-1,甲烷含量均在65%以上.发酵过程中最低pH为7.04.乙酸浓度最高分别为3 364、3 286、5 728 mg.L-1,丙酸和丁酸浓度均低于1 100 mg.L-1.结果表明,沼渣为难降解有机物,分解缓慢,不易出现酸化现象,但仍具有较强的产气潜力.     

复合吸收技术净化复杂工业有机废气

以低浓度、大风量、含无机物、尘粒和油分等成分的复杂工业有机废气为对象,进行复合吸收净化技术的研究,从吸收机制初步探索,对净化设备、工艺流程及工程应用分别进行了探讨.分别以3种不同的表面活性剂溶液为复合吸收剂,考察其处理含甲苯和醋酸丁酯废气的净化效果,结果表明降低复合吸收剂的表面张力,有利于甲苯和醋酸丁酯的去除率.针对复杂工业有机废气,开发高效吸收设备,集合了水膜、旋流板和填料3种吸收净化装置的优点于一体,具有结构简单、体积小、防堵塞及多级高效吸收传质的优势.工艺流程以吸收技术为主,整合了加热吹脱、燃烧和厌氧等工艺,最终使废气和吸收尾液达标排放.该技术已在制造、喷涂等多家企业的工程上应用.     

板式生物滴滤塔高效净化硫化氢废气的研究

采用营养液分层喷淋、pH分别在线控制(pH 2.5、 4.5、 6.5)的板式生物滴滤塔(plate type-biotrickling filter, PTBTF)净化H₂S废气,考察PTBTF于挂膜启动及稳定运行阶段对H₂S的降解性能.结果表明,PTBTF系统在14 d内即完成挂膜,对浓度为188.6mg·m^-3的H₂S去除率达到100%;在进口浓度100～1000mg·m^-3、空床停留时间(EBRT)28～4 s的条件下,H₂S的去除率可达到99%以上;当H₂S去除率≥90%时, PTBTF系统的最大去除负荷随EBRT(3.3～6 s)的增加而增大,EBRT 6 s的最大去除负荷达到1019.0g·(m³·h)^-1;上、中、下3层填料对H₂S的去除负荷随进口H₂S负荷的波动呈显著变化;通过荧光染色观察填料上的细胞数,发现在挂膜阶段微生物数量增长明显,第125 d上层、中层和下层填料上的菌落数(以干填料计)分别达到了1.29×10⁷、 5.47×10⁸和1.07×10⁹个·g^-1;采用扫描电镜观察填料表面的生物膜,可见上填料层和下填料层的优势菌分别为杆菌和丝状菌;利用变性梯度凝胶电泳初步揭示了系统运行过程中生物群落的演替规律;通过对产物的分析,确定该PTBTF系统降解H₂S后主要产生SO^2-₄和单质硫.     

Y形通风采空区自燃与有害气体排放的数值模拟

基于非均质多孔介质漏风渗流方程、多相气体渗流-扩散方程和多孔介质渗流综合传热方程,建立了采空区瓦斯与自燃发火耦合数值模型,开发了用迎风格式有限元方法联立求解的计算机程序(简称G3).计算以图形方式给出各量的区域分布解,从理论上描绘了Y形通风采空区的漏风流态,动态描绘了瓦斯、氧和CO的体积分数以及温度分布状态及其变化过程,并证明了Y形通风形式能避免采空区瓦斯向工作面涌出.计算中采空区按冒落非均质介质处理,考虑了瓦斯涌出对自燃的耦合作用,给出了这种耦合作用关系和解决办法.Y形通风采煤的自燃,两者存在着顾此失彼的关系.